In the industrial industry, conveyor belt plays the role of carrying and transporting goods. It saves manpower, reduces costs, improves work efficiency and speeds up the development of the industrial industry. However, the conveyor belt in use, if you do not pay more attention, after a long time of use, there will be some failures. If it can't be handled in time and effectively, it will affect the service life of the conveyor belt and the production speed of the enterprise.
What are some common faults of conveyor belt in use? What's the trick?
Conveyor belt in the use of common faults to conveyor belt deviation and fracture in the majority, there are many reasons for these faults, the following small series to give you a simple analysis of the causes of conveyor belt deviation and small coup.
Causes of belt deviation:
1. During the installation process, the head and tail rollers and the intermediate idler are not on the same center line and are not parallel to each other.
Tips: ① check the non coincidence degree between the transverse center of idler and the longitudinal center line of belt conveyor, and adjust it. ② Check the deviation value of the two planes of the mounting bearing seat of the head and tail frames, and adjust them to keep them in the same plane.
2. The material on the conveyor belt is not kept in the middle position, and the force is not uniform.
Small coup: check the blanking position, increase the baffle plate to buffer the speed of material falling, change the direction and position of material falling.
3. There is foreign matter between the conveyor belt and the roller.
Tips: maintain and clean the conveyor belt and roller, keep them clean and free from foreign matters.
Conveyor belt in the use of some of the common faults introduced here. In order to prolong the service life of the conveyor belt, it is necessary to maintain the conveyor belt and equipment regularly, find problems and solve them in time.