Industry knowledge

Generally, the assembly line conveyor belt joint can be bonded by thermal vulcanization. Of course, there are many methods for the joint, mainly depending on what the material conveyed by the conveyor belt is, whether it is heavy or not, and what the tensile force is.

It's not impossible to connect the conveyor belt joint by yourself. There must be a certain foundation, otherwise it will accelerate the fracture and loss of the conveyor belt and reduce the use time. When the situation is acceptable, you still need to contact the conveyor belt manufacturer to connect the joint, which can reduce unnecessary trouble.

Generally, customers are advised to directly use the processed ring belt, and the joint adopts tooth connection, which has good firmness. Under special circumstances, for example, it is inconvenient to remove the frame, or the particularity of the drum makes it impossible to install it directly in a ring, so it is necessary to select your own connector. If the conveyor is too heavy, the longer the conveyor line, the greater the tensile strength of the belt body, the greater the tensile force of the joint, and the higher the firmness of the joint.

Selection of glue or steel buckle for cold connection of conveyor belt

There are generally two kinds of joints of assembly line conveyor belt manufacturers, glue cold joint or steel buckle joint. Glue should not only choose the brand, but also depends on whether the adhesion is up to standard. As long as the adhesion is large, it is generally used under normal use, and the joint is relatively firm. Different types of steel buckles and steel buckle joints are selected according to the thickness of the belt, which has serious wear on the joints and rollers.

The above is the introduction of whether the assembly line conveyor belt can connect itself. I hope it will be helpful to you. Miou belt focuses on the production, processing and sales of industrial conveyor belts. It has always provided customers with high-quality conveyor belts. It can be customized according to the material, width, height and perimeter required by customers. New and old customers are welcome to customize.