consultation
 Email

2850383285@qq.com
Hello!Welcome to the official website of Mi'ou
邮箱2850383285@qq.com
中文版中文版 maskmask
Miou - conveyor belt Source factory R & D customization

Industry knowledge

当前位置:Home > News Center > Industry knowledge
How to extend the life of high

High temperature resistant silica gel conveyor belt is mainly made of silica gel, which has good comprehensive performance, such as high and low temperature resistance, oil resistance, aging resistance, chemical stability, non-toxic and tasteless. It is widely used in aviation, electronics, petroleum, chemical industry, machinery, electrical appliances, medical, oven, food and other industrial sectors. How to reasonably increase the service life of high-temperature silicone conveyor belt? Let's analyze it from the food processing conveyor belt manufacturer!

 

1. Whether the belt is installed in accordance with the provisions and the installation of high temperature resistant silica gel conveyor belt is in conformity with the regulations, and it is immediately related to whether the conveyor belt can operate normally and the life of the belt.

 

(1) Drive machine equipment. The drive machine equipment of high temperature resistant silica gel conveyor belt is composed of motor, reducer and barrel rolling. It is required to maintain the necessary flatness during installation. The protrusion in the middle and south of the transmission drum braking system is 1 / 200 of the barrel length to prevent the belt from running in the direction of deviation.

 

(2) Support point machine equipment. The supporting point machine equipment is composed of roller carrier and idler. The distance between upper roller groups is usually 1m to 1.5m, and the distance between lower idler groups is 2m to 3m. The distance is too large to increase the friction resistance of operation, accelerate damage and reduce the service life of conveyor belt. In order to prevent the direction of the high temperature resistant silica gel conveyor belt from running, it is also necessary to install one positive adjustment roller set every 5m to LOM.

 

2. The socket should be fine sand. The velocity and support of a raw material in the unloading diaphragm are analyzed. The angle between the vertical axis of the belt and the partition plate is unloaded by expression. The connection of the socket of the high temperature resistant silica gel conveyor belt by mechanical equipment will harm the compressive strength of the conveyor belt, and it is easy to destroy the roller together. Therefore, the conveyor belt socket must be made of fine sand. When the spigot is fine sand, the socket should be aligned to prevent the belt from running in the direction of deviation.

 

3. The installation of the feeder bin should be proper. The unloading port of the feeding bin shall not be too high from the surface of the conveyor belt, so as to prevent the impact of raw materials on the conveyor belt. The feeding direction of the feeding bin shall ensure that the relativity of the material poured is as small as possible to the reverse separation rate of the high temperature resistant silica gel conveyor belt, and close to the tangential split rate of the conveyor belt as far as possible, so as to prevent block sticking to the feeding port to cut the conveyor belt; The material poured at the feeder mouth shall be removed at the vertical axis symmetry position of the conveyor belt to prevent the belt from running in the direction and accelerating the belt damage.

 

The manufacturer of food processing conveyor belt thinks that it can be considered comprehensively from the above three aspects. If you want to order high quality silica gel conveyor belt, welcome to click online consultation, rich experience, quality control, trustworthy.

PVC Belt Food belt Treadmill belt Products Company Album Contact Us Web site map

Concern us

WeChat
WeChat

Contact us

  • Tel :+86-15900940696
  • Add :41 Sanjiang East Road, Yuecheng District, Shaoxing City, Zhejiang Province, China.
  • Email :2850383285@qq.com
Copyright © 2024 mioubelt.com All Rights Reserved. Zhejiang Miou Industry Belt Sh 版权所有浙ICP备17018385号-1