Edge conveyor belt manufacturers: how to solve the conveyor belt body bubble? If there are bubbles in the belt body of the side belt conveyor, it is generally that the rubber material is too plastic or too viscous, resulting in air tightness during vulcanization; if the rubber material of the side belt conveyor is too viscous, when the flat curing press is closed, it is not easy to extrude the air, which often leads to air tightness and scar.
In view of this kind of situation of edge conveyor belt, our company's solutions generally include: the plasticity of covering rubber should not be too large, generally more than 0.40, the operation is not ideal, especially chloroprene rubber. Due to the poor viscosity of ethylene propylene rubber and styrene butadiene rubber. If the plastic degree of the covering glue is a little higher, there will be few obvious scars.
How to solve the air bubble in the belt body of belt conveyor? The conveyor belt manufacturer will introduce it to you. If you are interested in conveyor belt, welcome to inquire.