Industry knowledge

What should be paid attention to when cleaning conveyor belt? Note the following:

1. Turn off the steam valve and adjust the pressure according to the position of the tensioning device.

2. For mechanical and electrical equipment, it should be wrapped in plastic.

3. Connect the device. Connect the cleaning machine to 220 V AC.

4. Wet the conveyor belt. (the purpose of this is to make the conveyor belt better absorb the cleaning solution and clean it.

5. Mix the cleaning solution and water in the ratio of 1:10 and stir evenly.

6. Spray the cleaning solution evenly on the conveyor belt with a flushing gun. Do not use too much punch belt to avoid injury. The flushing gun should be swept at one time instead of repeated flushing.

7. Rinse with clean water. This time to be careful, so that the conveyor belt cleaning will be clean.

What should we pay attention to when cleaning the conveyor belt? The conveyor belt manufacturer will introduce it to you. If you are interested in conveyor belt, welcome to inquire.