Industry knowledge

What should be paid attention to in the maintenance of mesh belt and heat-resistant belt? Conveyor belt may bring great convenience to the transfer and transportation of materials. However, after a long time of use, there will inevitably be some problems. How can heat-resistant conveyor belt be maintained in life to increase the service life of conveyor belt? Here is an introduction.

The large angle conveyor belt is composed of baseband, rib and diaphragm. The rib can prevent the material from sliding and falling. In order to bypass the drum easily, the baffle is designed to be corrugated; the function of the diaphragm is to support the material, and in order to realize the large angle conveying, T-type TC type is adopted. The baffle and diaphragm are connected with the baseband by secondary vulcanization, which has high connection strength.

1. During transportation and storage, the conveyor belt should be kept clean to avoid sunlight, rain and snow, and contact with acid, alkali oil, organic solvent and other substances, and should be separated from the heating equipment by one meter.

2. During storage, the temperature in the warehouse should be between - 18 ℃ and 40 ℃, and the absolute temperature should be between 50% and 80% RH.

3. During storage, the products shall be placed in rolls and not folded. During storage, they shall be turned over once a quarter.

4. Different types and standard layers of conveyor belt should not be connected together, and its joint should be glued. The large angle conveyor belt is composed of baseband, rib and diaphragm. The rib can prevent the material from sliding and falling. In order to bypass the drum easily, the baffle is designed to be corrugated; the function of the diaphragm is to support the material, and in order to realize the large angle conveying, T-type TC type is adopted. The baffle and diaphragm are connected with the baseband by secondary vulcanization, which has high connection strength.

5. The type, structure, standard and layer number of conveyor belt should be reasonably selected according to the application premise.

6. The running speed of the conveyor belt should not be higher than 2.5 m / s. The low speed should be selected as far as possible for the materials with large lumpiness and wear.

7. The diameter of the driving roller of the conveyor should be reasonably selected according to the planning rules of the conveyor.

About the mesh belt conveyor belt heat-resistant conveyor belt maintenance should pay attention to which aspects, conveyor belt manufacturers for you to introduce this. If you are interested in conveyor belt, welcome to inquire.