Industry knowledge

It is normal that the conveyor belt will be worn and the side length will appear after being used for a long time. However, if it grows a lot, we should pay attention to it. This is an abnormal phenomenon. If it is not handled in time, sometimes it can not be recovered. At this time, the belt will be scrapped. Now let's take a look at how the industrial conveyor belt lengthens?

After the external force is eliminated, the elastic elongation can return to the original state. The other part is the elongation of the braiding shrinkage of the frame material, which cannot be recovered. Industrial belt conveyor is widely used in agriculture, industrial and mining enterprises and transportation industry, conveying all kinds of solid blocks and powder materials or articles. Conveyor belt can be continuous, high efficiency, large inclination angle. The conveyor belt is safe to operate, easy to use, easy to maintain and low in freight. It can also shorten the transportation distance, reduce the project cost and save manpower and material resources.

Among the common fabric core conveyor belts, the elongation of EP conveyor belt is smaller, while that of NN conveyor belt is larger. In the process of use, because of the large creep of nylon fiber under the action of stress and the creep of fiber, the elongation of NN conveyor belt increases. After the external force is recovered, the amount of backward shrinkage is much smaller than the elongation. Industrial conveyor belt length change solution, adjust conveyor tension device, conveyor belt conveyor is widely used in agriculture, industrial and mining enterprises and transportation industry to transport all kinds of solid blocks, powder materials or articles.

Industrial conveyor belt can transport continuously with high efficiency and large inclination angle. The operation of the conveyor belt is safe. Conveyor belt is easy to use, easy to maintain, low transportation cost. Shorten the transportation distance, reduce the project cost, save manpower and material resources. When the tension device is adjusted to the limit, it is necessary to cut off the belt, cut a certain distance, and then make joints (cold vulcanization or hot vulcanization), and then restore the tension device to its original position and continue to use.

The above is about the industrial conveyor belt side length reasons and how to solve the introduction, I hope to help you. The service life of the conveyor belt is generally about 2-3 years. If the conveyor belt has been seriously aged and the side length is normal, a new conveyor belt should be replaced in time.