Industry knowledge

The synchronous belt sometimes encounters excessive noise during use. What is the reason for the excessive noise of the synchronous belt? The manufacturer will give you a detailed introduction.

reason:

1. Overload;

2. The diameter of the synchronous pulley is less than the minimum standard, and the diameter arm bandwidth of the synchronous pulley is less than the minimum standard;

3. Excessive tension;

4. The pulley is not parallel to the pulley;

5. The engagement between the synchronous belt and the synchronous pulley is abnormal.

Corrective measures for PU synchronous belt mainly include the following points:

1. Improve the design to avoid overload;

2. Improve the diameter design of the pulley and appropriately increase the diameter to ensure that the diameter of the synchronous pulley is about the bandwidth of the synchronous belt;

3. Adjust the tension;

4. Properly adjust the parallelism between pulleys;

5. Ensure that there is good engagement between the synchronous belt and the synchronous pulley.

The above is the introduction to the causes of excessive synchronous belt noise. I hope it will be helpful to you. Miou belt focuses on the production, processing and sales of industrial conveyor belts. It has always provided customers with high-quality conveyor belts. It can be customized according to the material, width, height and perimeter required by customers. New and old customers are welcome to customize.