consultation
 Email

2850383285@qq.com
Hello!Welcome to the official website of Mi'ou
邮箱2850383285@qq.com
中文版中文版 maskmask
Miou - conveyor belt Source factory R & D customization

Industry knowledge

当前位置:Home > News Center > Industry knowledge
How to maintain the conveyor b

With the progress of society, people pay more and more attention to health. They usually do sports. Running is a very popular sport. In order to be more convenient, many people will buy a treadmill or do a fitness card. When we use the treadmill, the running belt slip of the treadmill is a common small fault, especially our household treadmill. So what method can be used to adjust the slippage of the conveyor belt of the treadmill?

 

Adjustment method for slipping of conveyor belt of treadmill:

 

(1) If the treadmill suddenly slips during exercise, there must be a very uncomfortable feeling. At this time, you need to tighten the running belt. There are two screws at the tail of the running board, which should be tightened for 1 / 4 turn at a time.

 

(2) If the running belt is too tight and the friction is great, it is easy to cause the running belt to be permed and soft. It is necessary to add lubricating oil to the treadmill and loosen the running belt to make it moderately elastic and convenient to use.

 

(3) If tightening the running belt has no effect, first open the motor shield, gently step on the running belt with your foot, and check whether the conveyor belt between the motor and the front drum will stop. If so, it is necessary to pull the position of the motor away from the front drum, and then loosen the screw fixing the motor, but tighten the screw at the front of the motor.

 

How to maintain the treadmill Daily:

 

1. Do not use the treadmill conveyor belt to transport unsuitable materials; Do not place the sanding machine conveyor belt under unsuitable temperature environment and chemical environment.

 

2. The conveyor belt with appropriate specifications shall be selected according to the characteristics, size and weight of wood, such as speckle type, number of adhesive tape layers, temperature tolerance scale, etc;

 

3. Prevent the sanding machine from starting with load, and ensure that there is no material residue on the conveyor belt when it is shut down;

 

4. When the conveyor belt of the treadmill deviates, take measures to correct it in time;

 

5. In case of local damage of the conveyor belt of the treadmill, repair it in time to avoid the expansion of the damaged opening;

 

6. Prevent the sander from being blocked by frame and block materials, and prohibit sharp objects from scratching the surface of the conveyor belt;

 

7. Surface stains on the treadmill conveyor belt can be washed with neutral detergent or by alcohol or loose perfume. Pure benzene chemicals are strictly prohibited.

 

The above is about how to maintain the treadmill conveyor belt at ordinary times? Slip how to adjust the introduction, I hope it will be helpful to you. Welcome new and old customers to inquire. The above is an introduction on how to select manufacturers of industrial rubber synchronous belt. I hope it will be helpful to you. Miou belt focuses on the production, processing and sales of industrial conveyor belts. It has always provided customers with high-quality conveyor belts. It can be customized according to the material, width, height and perimeter required by customers. New and old customers are welcome to customize.

PVC Belt Food belt Treadmill belt Products Company Album Contact Us Web site map

Concern us

WeChat
WeChat

Contact us

  • Tel :+86-15900940696
  • Add :41 Sanjiang East Road, Yuecheng District, Shaoxing City, Zhejiang Province, China.
  • Email :2850383285@qq.com
Copyright © 2024 mioubelt.com All Rights Reserved. Zhejiang Miou Industry Belt Sh 版权所有浙ICP备17018385号-1