Industry knowledge

How to improve the carrying capacity of corrugated edge conveyor belt? The use of the special composite adhesive layer which can enhance the lateral bending resistance of the belt body of the edge conveyor belt can increase the lateral rigidity of the belt body by 2.5 times compared with the ordinary structure of the edge conveyor belt, even if the lateral rigidity of the belt body is increased from 0.09 to 0.036.

In order to improve the load-bearing capacity of the belt body of the side belt conveyor, the transverse bending deformation of the belt body of the side belt conveyor is the smallest after loading. The key to reduce the transverse bearing deformation and increase the load-bearing capacity of the belt body is to improve the transverse rigidity of the belt body of the side belt conveyor through the conveyor drive drum.

The lateral rigidity value of the belt body of the side belt conveyor refers to the ratio of the bending weight of the belt body and the width value of the belt body of the roller large angle wavy side belt conveyor, which freely supports the two sides of the belt body in the transverse vertical section of the belt body.

The technical standard requirement of the lateral rigidity value of the side belt with high lateral rigidity of buffer idler is not more than 0.05. Through the optimization and improvement of the structure of the side belt, the detection value of the lateral rigidity is 0.036 after adding the lateral rigidity reinforcing layer, the lateral deformation of the belt body is reduced after loading, and the bearing capacity can be increased by 15% ~ 20%.

How to improve the carrying capacity of corrugated edge conveyor belt, conveyor belt manufacturers will introduce to you. If you are interested in conveyor belt, welcome to inquire.