Conveyor belt is an important part of mechanical equipment, which is used to transport products in short distance. In recent years, conveyor belt is more and more widely used, and there are more and more types of conveyor belt. It can be divided into light conveyor belt and heavy conveyor belt. Light conveyor belt can also be subdivided into many kinds. How to choose conveyor belt?
How to buy Conveyor Belt:
1. Accurately describe the name and nature of specific materials. In particular, the particle size, temperature, acid, alkali and other corrosivity and special requirements. For example, the service temperature of heat-resistant conveyor belt shall be explained.
2. Specify the specific application, required specifications (width, length, number of layers, thickness, etc.), especially the service temperature and traffic volume of heat-resistant conveyor belt.
Master the selection method of conveyor belt, and then master the basic performance of conveyor belt, you should be able to buy your own satisfactory products.
Is the lifting belt easy to use?
The application of industrial belt is common, and it can be seen in all major industries. Sometimes it can be seen that the conveyor belt can be vertical 90 °, transport materials from low to high without falling, and complete a climbing transportation. This is what we commonly call the lifting conveyor belt. In addition to the friction of the belt itself, special processing is also carried out on the surface - diaphragm and skirt, so it is called skirt baffle conveyor belt in the industry. Today, the conveyor belt manufacturer takes you to have a brief understanding of the lifting conveyor belt.
The lifting conveyor belt can transport all kinds of bulk materials, from coal, ore, sand to chemical fertilizer and grain, along the horizontal, inclined, vertical and variable angle directions. The particle size of materials is unlimited, ranging from very small particle size to 400mm large particle size, and the conveying capacity can range from 1m3 / h to 6000 m3 / h. It mainly consists of the following three parts:
1. High strength and wear-resistant baseband, with greater transverse stiffness and longitudinal flexibility.
2. High strength hot vulcanized rubber corrugated edge.
3. Transverse diaphragm to prevent objects from sliding. The bottom and baseband of the retaining edge and diaphragm are thermally vulcanized into one. The height of the retaining edge and diaphragm can reach 40-630mm. Canvas is pasted in the retaining edge to strengthen the tear resistance of the retaining edge.