Industry knowledge

The tables, benches and wood carvings that can be seen everywhere in our life are all made of wood. Sanding machine is usually used in wood processing. When it comes to sanding machine, sanding conveyor belt has to be mentioned. With the sanding machine conveyor belt, for the wood industry, it not only reduces the manpower, but also greatly improves the work efficiency. So, what is the sander belt like?

In the process of sanding and other wood processing, the wood should move with the conveyor belt. If the friction is not enough, the conveyor belt will move forward by itself, but the wood will not move. In this way, the purpose of sanding wood can not be achieved. Secondly, the hardness of the special conveyor belt for wood should be appropriate. If it is too hard, it will be more difficult to load the conveyor belt into the sander, and the softer one will affect its service life. Therefore, the belt of sanding machine should have the following characteristics:

1. Good abrasion resistance, high tensile strength, high temperature resistance and anti-aging.

2. Good ductility, good flexibility, stable size and stable operation

3. Good elasticity, good impact resistance

4. It can effectively store and remove the sawdust produced in the process

The above is some of the characteristics of sanding conveyor belt, I believe you have an understanding of the conveyor belt used in the wood industry processing!