Industry knowledge

Flat belt with sheet base has become a high-speed drive belt, with advantages of good elasticity, stable operation and low production cost. It has been applied in many industries. In the automobile, factor, prevention, medicine, daily chemical and food industries, many people will ask if the flat belt is oil resistant?

Because the flat belt is comfortable and the material of the sheet base has certain oil-proof effect, the flat belt can be used in the polluted environment. The application of flat belt is because of its relatively simple structure, light weight, no lubrication and no too much tension. The load of the shaft in the belt transmission system is small, the noise is low during operation, the maintenance is simple and the replacement is convenient. Therefore, flat belt based on sheet is widely used in automobile, textile machinery, printing machinery, light industry, food transportation, medical equipment, precision instruments and various precision machinery equipment.

When selecting flat belt, it is necessary to observe the surface of flat belt carefully. Relatively speaking, the cleanliness and cleanliness of flat belt surface is secondary, as long as the flat belt surface is not that dirty and spectral is acceptable. However, the key to the appearance of flat belt is to ensure that the surface of flat belt on the base is not deformed or twisted, and the teeth of flat belt must be full and firm. This is the basic and prerequisite for the purchase of flat belt.

Then, when purchasing a flat belt, make sure to measure the specifications and shape accordingly. For some pairs of values, the value will not be accurate to one millimeter, and the range of difference can be allowed. However, the premise of this range of differences is that it does not affect the use of the future. At the same time, check whether the winding performance of flat belt can meet the standard of flat belt. The stronger the winding performance, the more convenient it can bring to the work, thus improving the working efficiency.

Above is about the flat belt on the basis of the oil resistance and how to select the introduction, hope to help you.